auto flowering cannabis plants

Saving Your Frostbitten Autoflowering Cannabis Plants: Tips and Trick

With the onset of winter comes the risk of getting frostbite for your autoflowering cannabis plants. With all of the outdoor conditions that are available to us in the winter, it is important to learn how to protect your cannabis plants from being frostbitten. Knowing the signs of frostbite in the early stages of a marijuana’s life cycle can help you to avoid permanent damage to your plant and underlying tissues. If you live on a cold winter climate, it is crucial to know what frostbite is and the frostbite symptoms that your plant may experience. We have put together the following information to help you learn what to look for and ways to treat it.

What Is Frostbite for your Autoflowering Cannabis Plants?

Frostbite occurs when the autoflowering cannabis plants and its tissue underneath become frozen. Early frostbite symptoms can be seen when your plant turns red and becomes really cold. Then, it will turn numb and be hard and pale. All the parts of your plants are the usual areas where frostbite occurs from the stem, buds, and roots. Exposed parts of your autoflowering cannabis plants are most likely to become frostbitten, but it can happen to the part that is beneath the soil.

The Three Stages of Frostbite

Frostbite happens in three stages for your Autoflowering Cannabis Plants:

Frostnip

This is the earliest stage of frostbite, seen when your autoflowering cannabis plant’ skin becomes red and cold. When the affected area becomes warm again, you might have tingling and pain in that area. Frostnip does not cause permanent damage.

Superficial Frostbite

If the cold, red skin of frostnip continues to be exposed, new frostbite symptoms will appear. Your autoflowering cannabis plant’s skin will turn white or pale and begin to feel warm. This warming sensation is a serious sign of skin damage. Treating frostbite by rewarming the affected area may cause stinging, burning and swelling. Your plant’s skin may look mottled or marked with pale spots and darker spots of skin. During the next 36 hours, a fluid-filled blister will likely appear.

Deep Frostbite

This is the most severe stage of frostbite. It affects both the surface layer of your autoflowering cannabis plant’s skin and the tissues underneath. Your plant’s skin will become white or bluish gray. The affected area will lose all feeling, including loss of pain or discomfort and the feeling of being cold. The stem and the leaves may not work due to the numbness as well as the photosynthesis within. After rewarming the area, large blisters will form within 24 to 48 hours. When the blisters heal, the area underneath will be black and hard, and the plant‘s tissue will die.

Causes of Frostbite

Frostbite is usually caused by the autoflowering cannabis plant’s skin is exposed to cold weather. Cold temperatures on a windy day can shorten the length of time it takes to get frostbite. It can also be caused by the skin coming into direct contact with ice, frozen metal or very cold liquids.

Extended Exposure

Making your autoflowering cannabis plant stay outside too long when it is cold and windy will lead to frostbite. The chances of getting frostbite for your plant may increase when the air temperature falls below 5 degrees Fahrenheit even on a calm day. When the wind chill registers at -16 degrees Fahrenheit, frostbite can occur in less than 30 minutes,

Direct Contact

Different Methods of Waterproofing Your Autoflowering Cannabis Plants from Frostbite

The best way to identify how to waterproof your autoflowering cannabis plants in your garden is to first consider the materials from which your plant must be used to protect from frostbite is made. This will play a big role in your waterproofing method. Take a few minutes to evaluate the autoflowering cannabis plants that you wish to waterproof. You will find that learning how to waterproof your plants is far simpler than you expected as long as you pay attention to the details.

Wax Waterproofing

Want to know how to waterproof your autoflowering cannabis plants with wax? You will need to be prepared with the right type of wax to get the best results. You can use beeswax or a colorless candle to waterproof your autoflowering cannabis plants. These materials can be found in most gardening essential stores. If you cannot find a candle or beeswax, odorless paraffin candles, like tealights or votives, will also do the trick.

Wax waterproofing will work on autoflowering cannabis plants of nearly every type from leaves, stems, buds, and flower, although certain types of autoflowering cannabis plants will take to the process better than others.

One thing you will find as you explore how to waterproof your autoflowering cannabis plants with wax is that not every surface works as well for this method as every other. Textiles actually work well with wax waterproofing, but smoother surfaces will require more maintenance to keep that wax coating intact.

Spray Waterproofing

For smoother surfaces of your autoflowering cannabis plant like the leaves or the buds, consider using a waterproofing spray as you explore your options for how to waterproof your marijuana plants. There are many different types of waterproofing spray that offer benefits including:

Blocking water
Preventing Mold
Inhibiting mildew growth
Delaying water-related deterioration

You can find waterproofing sprays in most shoe stores and outdoor stores. If you plan to get your boots wet regularly, especially if you expect to have them partially submerged for any length of time, then a waterproofing spray will help keep your boots and your feet dry when you are in a wet environment.

As you spray your autoflowering cannabis plants, make sure to hit every single angle on the stems and leaves but remember that textured parts, like the root parts, may require more than one coat to really get the full waterproofing effect. Sometimes, repetition is part of learning how to waterproof your autoflowering cannabis plants, so be ready to perform some steps in this process more than once!

Alternative Waterproofing Methods

If you are in a pinch and need to know how to waterproof autoflowering cannabis plants fast with items you may already have on hand, then consider using a few of these common household materials to keep your autoflowering cannabis plants dry and assure your profit. These methods are, of course, only temporary. They will keep your feet dry if you are desperate, but they will wear off and are not necessarily great for the condition of your footwear.

You might use the following:

Transmission oil, which you can smear all over your autoflowering cannabis plants before getting wet; but be warned, it will turn your boots red

Clear-coat enamel spray, which will protect your autoflowering cannabis plants from moisture temporarily but will also flake off quickly as it cracks with use

Vaseline, which can be rubbed into your autoflowering cannabis plants in the same way you would apply wax but will not last the same way.

The Effects to the Autoflowering Cannabis Plants

On this stage, you will start to notice that new leaves are no longer growing on your cannabis plant. Thus, considering the remaining living leaves must be considered as your plant’s armor as insurance against nutrient deficiency. You may also want to consider strategic defoliation as this is helpful to expose the sites of budding in your cannabis plants. The armor leaves must be maintained to avoid future leaf problems.

Once you are in the eight weeks of flowering, the buds are now quickly fattening. You can start to notice that the pistols and trichomes are now maturing as new pistils develop on the buds that grow along with them. On this stage, you are just making sure that you maintain a good yield until the harvesting time. The strains will be ready at different times. Its full glory will finally show-off in just around eight to ten weeks. It is also where the overpowering smell of your cannabis plant is now streaming out.

Final Words

Now that you know the frostbite symptoms and the potential for long-term damage from frostbite of your autoflowering cannabis plants, we hope that you will prepare yourself adequately when venturing out this business into the cold. Remember, you can prevent frostbite by following these simple tips. Winter brings the opportunity for all kinds of autoflowering cannabis plants to grow still. Dress properly, and make sure to pay attention to the weather so you can safely enjoy harvesting your yield. Don’t let frostbite ruin your profit.

As soon as your buds go fatter, soon enough your buds will get more substance. You will start to notice that the white pistils are sticking straightly in all directions on a daily basis. Also, the stretch that is happening on the plant shall no longer proceed so you will be needing to pay attention to getting your plant trained. You can do this by holding your buds up as if they are getting much heavier. If your cannabis plant has been used to into the light, you may want to try considering super cropping as a solution where you are forcing the stems to bend at a 90-degree angle.

 

 

 

Subscribe To Our Newsletter

Subscribe to our news letter today to receive latest news, tutorials and special offers right directly in your inbox!

We respect your privacy. Your information is safe and will not be shared